^[[http://wiki.e-plex.co/doku.php?id=e-plex_wiki|E-PLEX Wiki Home]]| >> ^[[http://wiki.e-plex.co/doku.php?id=hardwarepub:e-plex_modules|E-Plex Module List]]^

====== 345LCDC - 5.6" Colour LCD Display ======
{{http://support.e-plex.co/Product Photos/350LCD.JPG?450}}

E-Plex 5.6" Colour LCD Display.

===== Links =====

  * [[http://support.e-plex.co/Datasheets/345LCDC.pdf|Datasheet]]
  * [[:HardwareDist:Modules:345LCDC|Distributor resources]] (requires distributor login[[:Distributor login|{{:help.png|}}]])

==== When I interrogate or initialise the module, E-Logic reports "Time out reading module key at address XX!", is my module faulty? ====

As part of the interrogate and initialise procedures, E-Logic requests a piece of information called the module key. However this feature was only added to the 345LCDC in V2.07.

If you see this message with V2.07, then there is a problem with the hardware.  If you are using older firmware, this message can be safely ignored.