176QDC6 - Dual Thermocouple Module


E-Plex dual themocouple module. It can also be used with PT100 platinum resistance sensors if an external resistor is used.


Frequently Asked Questions

Why can't I bootload this module?

The flash memory on the processor is full, meaning that there is no room for a bootloader. Upgrades must be carried out using an AVR programmer and suitable interface cable.

Readings from module make no sense?

Check all unused channels contain a multiplier of 1 and an offset of 0.

hardwarepub/modules/176qdc6.txt · Last modified: 2016/02/22 11:20 by Bob Lynas
Recent changes RSS feed

Wiki help | Staff area