This is an old revision of the document!
Table of Contents
361SIM - Magnum Inverter Interface
Obsolete magnum inverter interface.
E-Logic Software Object
Functionality
| Input | Type | Description |
|---|---|---|
| Invert | Digital | |
| Charge | Digital | |
| Equalize | Digital | |
| Bat Type | Digital | |
| Bat Size | Analogue (16-bit) | |
| Shore Amps | Analogue (16-bit) | |
| Fah | Digital | |
| Search Watts | Analogue (16-bit) | |
| Charge Amps | Analogue (16-bit) | |
| Battery Cutoff | Analogue (16-bit) | |
| VAC Cutoff | Analogue (16-bit) | |
| Output | Type | Description |
| Status | Analogue (8-bit) | |
| DC Volts | Analogue (10-bit) | |
| DC Amps | Analogue (10-bit) | |
| Bat Temp | Analogue (10-bit) | |
| Bat Flts | Analogue (8-bit) | |
| Invert | Digital | |
| Charge | Digital | |
Links
- Distributor resources (requires distributor login
)
FAQs
When I interrogate the module, E-Logic reports "Data Error checking streaming on module at address XX!", is my module faulty?
There is a bug in the command that E-Logic uses to check whether or not streaming has been enabled. This module must have streaming enabled, but E-Logic is unable to verify that it has been enabled successfully. You can ignore this message as long as the module communicates when you start streaming. If the module does not communicate in streaming mode, check that it has been programmed correctly. If it still does not communicate, it is faulty.
As this module is now obsolete, it is unlikely that this bug will be fixed.
