Table of Contents
176QDC6 - Dual Thermocouple Module
E-Plex dual themocouple module. It can also be used with PT100 platinum resistance sensors if an external resistor is used.
Links
- Distributor resources (requires distributor login
)
Frequently Asked Questions
Why can't I bootload this module?
The flash memory on the processor is full, meaning that there is no room for a bootloader. Upgrades must be carried out using an AVR programmer and suitable interface cable.
Readings from module make no sense?
Check all unused channels contain a multiplier of 1 and an offset of 0.