E-Plex Module List

N.B. Do not apply a current firmware version to an earlier hardware revision! If in any doubt check the individual module page or contact E-Plex Ltd.

Note also that some manufacturers operate an approved firmware list which may include older versions of firmware.

Code Description Firmware HW LEN Addresses Notes
149CT30 Relay Module 2.03 G3 10 1
172QR Quad Relay Module 2.01 F 3 1
174OIM Octal Input Module 2.02 H 5 8
176QDC6 Dual Thermocouple temperature module 2.01 C 5 1
218CHL Dometic chiller interface 2.00 G 3 168
218ESL E-Plex serial link 2.01 G 3 12
218MOD Modbus receiver 2.01 D 3 64/128/192
218RECV Generic RS232 receiver 2.02 G 3 65
218VBM Victron battery monitor interface 2.05 F1 2 69
218VEI VE.Bus interface 2.12 F2 3 98
278AM Sonalert module 2.01 C 4 1
297QAO Quad Analogue Output 2.02 D 3 1
303TM1 Analog Temperature Module 2.07 E 3 10
303TM Digital Temperature Module - - - -
318PFTG Pressure Fuel Tank Gauge 2.09 F7 9 16
319RSM Resistive Sensing Module 2.06 D1 3 10
325QMM Quad Multi Module 2.06 F 3 9
331BMI Inductive battery monitor 2.05 D3 3 20
335RFE RF to E-Plex Receiver Module 2.00 C 5 5 Not for new designs.
336PFM Power monitor with Frequency 2.06 B3 5 51
338QFT Quad Analogue Input module 2.02 B1 10 40
343QDCM Quad DC Module 2.02 B2 3 40
345LCDC 5.6” Colour LCD 2.07 C 3 48/16 Not for new designs.
349PDM Power Distribution Module 2.11 C3 3 76
350LCD 10” Display with Transmissive 2.16 C1 1 24
356DRIM Dual Relay, Quad Input Module 2.05 D1 12 4
360ACI Dometic A/C interface 2.08 B1 3 17
361SIM Serial Interface Module for Magnum Inverters 2.08 B1 3 48 Not for new designs.
366HMM 6 channel multi module 2.17 C5 2 6/18/48 Not for new designs (replaced by 805OPM).
367TPD Touch Pad Display 2.12 D 20 8
369DRM Dual Reversing Module 2.04 B1 8 1
387EBM E-Plex Bridge Module 2.02 B2 3 64/128
389DMAC Distribution Module AC 2.05 B2 2 59
397LS Light Sensor 2.01 E 3 16
Code Description Firmware HW LEN Addresses Notes
400ECM Clock Module 2.12 B6 - 48
405DRP Distribution Relay Panel 2.00 A 1 1
406QDM Quad Dimmer Module 2.01 B 3 4
407QHM Quad HighAmp Module 2.17 C5 2 6/18/48 Not for new designs (replaced by 805OPM).
411BAM Battery Auctioneering Module 2.09 A3 2 42
413DWM Dual Wiper Module 2.17 C5 1 6/18/48 Not for new designs (replaced by 805OPM).
416TPS Touch Panel Switch 2.01 A2 6 10
421QIM Quad Input Module 2.03 A 4 4
422QMM Quad Multi Module 2.09 A 1 14
425DRM Dual Reversing Module 2.06 B 1 8 Not for new designs (replaced by 369DRM).
426HSS Hexa Sinking Switch 2.04 A 1 12
427CANI Generic CAN interface 2.05 B 4 112 Not for new designs (replaced by 816CAN).
427DOM Dometic chiller interface 2.00 B 4 36 Not for new designs. 427DOM revB firmware will run on 816CAN revB hardware.
428RSP4 Rocker Switch Panel - 4 way 2.07 A 17 8
428RSP5 Rocker Switch Panel - 5 way 2.07 A 19 10
428RSP6 Rocker Switch Panel - 6 way 2.07 A 21 12
428RSP7 Rocker Switch Panel - 7 way 2.07 A 23 14
428RSP8 Rocker Switch Panel - 8 way 2.07 A 25 16
431USB USB to serial adapter - B - -
436MMX 10 channel multi module 2.06 A6 2 22 Not for new designs (replaced by 805OPM).
439DMAC 240V DMAC 2.14 B3 1 17
442EMS DMAC with transfer switch 2.02 C 1 59
450ECM Memory enhanced clock 2.13 B6 - 48
478TPS Blue TPS with power feed 2.01 A 3 10 LEN 1 if V+ pin used. Not for new designs (use 416TPS instead).
483HUB HUB Module 2.01 B 1 4 Not for new designs.
500CCM Colour clock module with transmissive display and touch sensor 2.13 C5 - 50 Not for new designs. For clock functionality, use the 400ECM/450ECM; for colour touch-screen functionality, use the 350LCD. A bundle is available containing a 400ECM and 350LCD for less than the price of a 500CCM.
500LCD Display version of 500CCM 2.13 C5 0 50
Code Description Firmware HW LEN Addresses Notes
801iPLEX iOS interface 2.00 G 3 33
803RDP Radial Distribution Point - - 0 -
804DCL ES high power DC link box. 2.00 E1 2 54
805OPM Octal power module 2.09 C1 2 18/26/90 New!
815ENO EnOcean gateway for PTM200 switches 2.02 B2 7 11
816CAN Generic CAN interface 2.01 B2 4 106
821BD Dual Blocking Diode - A - - New!
Code Description Firmware HW LEN Addresses Notes

Key

  • HW: The most recent hardware revision available for the module.
  • LEN: Load Equivalence Number - The sum of the LEN values of all the modules in a system must be less than the maximum LEN supported by the clock module.
  • Addresses: The number of addresses this module uses in an E-Plex stream. The sum of the addresses used by all the modules in a system must be less than the maximum address count supported by the clock module.

Clock Capabilities

The size of a system is limited by 3 factors; the number of modules, the total LEN value of those modules, and the number of addresses. Limits are per clock, so larger systems can be made by interconnecting separate systems via the 387EBM. If a system exceeds these values, please contact E-Plex for advice.

Code Description Firmware Maximum LEN Maximum Modules Maximum Addresses Notes
400ECM Economy Clock Module 2.12 250 50 1000
450ECM Memory enhanced clock 2.13 250 50 1000
500CCM CCM Transmissive with TS 2.13 100 25 1000 At 12V, J15 jumper set
500CCM CCM Transmissive with TS 2.13 200 25 1000 At 24V, J14 jumper set
hardwarepub/e-plex_modules.txt · Last modified: 2018/04/18 10:56 by Andy Hall
 
Recent changes RSS feed

Wiki help | Staff area