345LCDC - 5.6" Colour LCD Display


E-Plex 5.6” Colour LCD Display.


When I interrogate or initialise the module, E-Logic reports "Time out reading module key at address XX!", is my module faulty?

As part of the interrogate and initialise procedures, E-Logic requests a piece of information called the module key. However this feature was only added to the 345LCDC in V2.07.

If you see this message with V2.07, then there is a problem with the hardware. If you are using older firmware, this message can be safely ignored.

hardwarepub/modules/345lcdc.txt · Last modified: 2016/02/22 11:23 by Bob Lynas
Recent changes RSS feed

Wiki help | Staff area