Input | Type | Description |
---|---|---|
Invert | Digital | |
Charge | Digital | |
Equalize | Digital | |
Bat Type | Digital | |
Bat Size | Analogue (16-bit) | |
Shore Amps | Analogue (16-bit) | |
Fah | Digital | |
Search Watts | Analogue (16-bit) | |
Charge Amps | Analogue (16-bit) | |
Battery Cutoff | Analogue (16-bit) | |
VAC Cutoff | Analogue (16-bit) | |
Output | Type | Description |
Status | Analogue (8-bit) | |
DC Volts | Analogue (10-bit) | |
DC Amps | Analogue (10-bit) | |
Bat Temp | Analogue (10-bit) | |
Bat Flts | Analogue (8-bit) | |
Invert | Digital | |
Charge | Digital |
There is a bug in the command that E-Logic uses to check whether or not streaming has been enabled. This module must have streaming enabled, but E-Logic is unable to verify that it has been enabled successfully. You can ignore this message as long as the module communicates when you start streaming. If the module does not communicate in streaming mode, check that it has been programmed correctly. If it still does not communicate, it is faulty.
As this module is now obsolete, it is unlikely that this bug will be fixed.